SCI(E):149, ​non-SCI(E):13

169 / Submitted

Tensile and high-cycle fatigue properties of extruded AZ91–0.3Ca–0.2Y alloy with excellent corrosion and ignition resistances

Jae Won Cha, Ye Jin Kim, Sung Hyuk Park*, et al.

168 / Submitted

Effects of surface roughness on bending properties of rolled AZ31 alloy

Gyo Myeong Lee, Jong Un Lee, Sung Hyuk Park*

167 / Submitted

Acceleration of aging behavior and improvement of mechanical properties of extruded AZ80 alloy through {10-12} twinning

Hyun Ji Kim, Ye Jin Kim, Sung Hyuk Park*

166 / Submitted

Effect of initial microstructure on graphitization behavior of Fe-0.55C-2.3Si steel

Ye Jin Kim, Sung Hyuk Park*

165 / Submitted

Low-cycle fatigue properties and fatigue life prediction model of hot-rolled twin-roll-cast AZ31 sheets with different thicknesses

Ye Jin Kim, Sung Hyuk Park*, et al.

164 / Submitted

Improvement in mechanical properties of high-speed-extruded Mg–5Bi–2Al alloy through trace Mn addition

Sang-Cheol Jin, Jae Won Cha, Sung Hyuk Park*, et al.

163 / Submitted

Microstructural evolution of rolled AZ31 alloy plate during in-plane compression and annealing: Effect of amount of compressive strain

Jong Un Lee, Ye Jin Kim, Sung Hyuk Park*

162 / Accept  Journal of Magnesium and Alloys [JCR rank: 0.62%]

Comparative study of extrudability, microstructure, and mechanical properties of AZ80 and BA53 alloys

Sang-Cheol Jin, Jae Won Cha, Jongbin Go, Jun Ho Bae, Sung Hyuk Park*

161 / Accept  Journal of Magnesium and Alloys [JCR rank: 0.62%]

Effects of homogenization temperature on microstructure and mechanical properties of high-speed-extruded Mg–5Bi–3Al alloy

Jae Won Cha, Sang-Cheol Jin, Jae-Gil Jung, Sung Hyuk Park*

160 / In Press  Journal of Magnesium and Alloys [JCR rank: 0.62%]

Extrusion limit diagram of AZ91–0.9Ca–0.6Y–0.5MM alloy and effects of extrusion parameters on its microstructure and mechanical properties

Dong Hee Lee, Ye Jin Kim, Sang-Hoon Kim, Byoung Gi Moon, Sung Hyuk Park*

159 / In Press  Journal of Magnesium and Alloys [JCR rank: 0.62%]

Improvement in tensile strength of extruded Mg–5Bi alloy through addition of Sn and its underlying strengthening mechanisms

Sang-Cheol Jin, Jae Won Cha, Jeong Hun Lee, Taekyung Lee, Sang-Ho Han, Sung Hyuk Park*

158 / In Press  Journal of Magnesium and Alloys [JCR rank: 0.62%]

Effects of Sn addition on the microstructure and mechanical properties of extruded Mg–Bi binary alloy

Sang-Cheol Jin, Jong Un Lee, Jongbin Go, Hui Yu, Sung Hyuk Park*

157 / In Press  Journal of Magnesium and Alloys [JCR rank: 0.62%]

Variations in microstructure and bending formability of extruded Mg–Al–Zn–Ca–Y­–MM alloy with precompression and subsequent annealing treatment conditions

Jong Un Lee, Sang-Hoon Kim, Dong Hee Lee, Hyun Ji Kim, Young Min Kim, Sung Hyuk Park*.

156 / In Press  Journal of Magnesium and Alloys [JCR rank: 0.62%]

Bending properties of extruded AZ91–0.9Ca–0.6Y alloy and their improvement through precompression and annealing

Jong Un Lee, Gyo Myeong Lee, Sung Hyuk Park*

155 / In Press  Journal of Magnesium and Alloys [JCR rank: 0.62%]

Effects of Al addition on microstructure and mechanical properties of extruded Mg–3Bi alloy

Sang-Cheol Jin, Jae Won Cha, Jun Ho Bae, Hui Yu, Sung Hyuk Park*

154 / In Press  Metals and Materials International [JCR rank: 19.37%]

Evolution of microstructure and mechanical properties of graphitized Fe-0.55C-2.3Si steel during quenching and tempering treatment

Ye Jin Kim, Sang Woo Bae, Nam Suk Lim, Sung Hyuk Park*

153  Journal of Materials Science & Technology [JCR rank: 3.12%], 93, 41-52 (2021. 12.10)

Comparative study of tensile and high-cycle fatigue properties of extruded AZ91 and AZ91–0.3Ca–0.2Y alloys

Ye Jin Kim, Young Min Kim, Seong-Gu Hong, Dae Woong Kim, Chong Soo Lee, Sung Hyuk Park*

152  Journal of Magnesium and Alloys [JCR rank: 0.62%], 9, 1233-1245 (2021. 07.15)

Microstructural evolution and grain growth mechanism of pre-twinned magnesium alloy during annealing

Ye Jin Kim, Jong Un Lee, Young Min Kim, Sung Hyuk Park*

151 Materials Letters [JCR rank: 32.19%], 295, 129835 (2021. 07.15)

Loading-direction dependence of fatigue behavior of rolled Mg alloy containing {10-12} twins

Jeong-Hun Lee, Ye Jin Kim, Sung Hyuk Park*

150 Materials Science Forum [Scopus], 1034, 9-15 (2021. 06. 15)

Tensile and fatigue properties of twin-roll-cast AZ31 magnesium alloy strips with different thicknesses

Ye Jin Kim, Young Min Kim, Young-Rae Cho, Sung Hyuk Park*

Effects of post-heat treatment on microstructure, tensile properties, and bending properties of extruded AZ80 alloy

Gyo Myeong Lee, Jong Un Lee, Sung Hyuk Park*

148 Journal of Alloys and Compounds [JCR rank: 6.87%], 862, 158051 (2021. 05. 05)

Dong Hee Lee, Byoung Gi Moon, Young Min Kim, Sung Hyuk Park*

Unusual relationship between extrusion temperature and tensile strength of extruded Mg–Al–Zn–Ca–Y–MM alloy

147 Journal of Materials Science & Technology [JCR rank: 3.12%], 71, 87-97 (2021. 04. 30)

Hyun Ji Kim, Sang-Cheol Jin, Jae-Gil Jung, Sung Hyuk Park*

Influence of undissolved second-phase particles on dynamic recrystallization behavior of Mg–7Sn–1Al–1Zn alloy during low- and high-temperature extrusions

146 International Journal of Precision Engineering and Manufacturing-Green Technology [JCR rank: 6.30%], 8, 583-594 (2021. 03)

Thong Phi Nguyen, Seungho Choi, Sung-Jun Park, Sung Hyuk Park, Jonghun Yoon

Inspecting method for defective casting products with convolutional neural network(CNN)

145 Metals and Materials International [JCR rank: 19.37%], 27, 530-537 (2021. 03)

Dong Hee Lee, Sang-Hoon Kim, Hyun Ji Kim, Byoung Gi Moon, Young Min Kim, Sung Hyuk Park*

Effects of extrusion speed on the microstructure and mechanical properties of Mg–9Al–0.8Zn–0.9Ca–0.6Y–0.5MM alloy

144 Metals and Materials International [JCR rank: 19.37%], 27, 514-521 (2021. 03)

Hyun Ji Kim, Sang-Hoon Kim, Sang Won Lee, Byoung Gi Moon, Young Min Kim, Jeong Hun Lee, Jonghun Yoon, Hui Yu, Sung Hyuk Park*

Significant improvement in extrudability of Mg–9Al–0.8Zn–0.9Ca–0.6Y alloy through mischmetal addition

143 Journal of Materials Science & Technology [JCR rank: 3.12%], 66, 139-149 (2021. 03. 10)

Sang Won Lee, Gukin Han, Tea-Sung Jun, Sung Hyuk Park*

Effects of initial texture on deformation behavior during cold rolling and static recrystallization during subsequent annealing of AZ31 alloy

142 Materials Science and Engineering A [JCR rank: 9.37%], 801, 140437 (2021.01.13)  

Sang-Hwa Lee, Jae-Gil Jung, Sung-Il Baik, Sung Hyuk Park, Min-Seok Kim, Young-Kook Lee, Kwangjun Euh

Effects of Ti addition on the microstructure and mechanical properties of Al–Zn–Mg–Cu–Zr alloy

CALL US
EMAIL US
ADDRESS

Tel: 053-950-5565

41566 대구광역시 북구 대학로 80

80, Daehak-ro, Buk-gu, Daegu, Republic of Korea